Posted by Circuits99 on March 24, 2022
BC547 Transistor Pinout, Datasheet | Applications of BC547 Transistor is the artlcle explaining BC547 Transistor In this article, I would like to explain What is BC547 Transistor, where we can use it, and also the BC547 Datasheet , Ap...
BC547 Transistor
In this article, I would like to explain What is BC547 Transistor, where we can use it, and also the BC547 Datasheet, Applications of BC547, its Characteristics, and BC547 Pinout. All the Electronics circuit-based projects will be discussed on this website Circuits99.com.
Transistors are small devices which is control the flow of electricity in circuits. They are used to amplify signals and control the flow of electricity. Transistors come in many different shapes and sizes, and a variety of electronic devices. The first transistor was discovered in 1947, and today billions of transistors are used in electronic devices and circuits every year.
What is BC547 Transistor
BC547 Transistor Working
BC547 transistor has minimum and maximum gain values are 110 to 800, it is denoted by (hFE). This gain value determines the amplification capacity of the transistor. The collector’s maximum current flow is 100mA. That is why we cannot connect more than 100mA consume load through this transistor. The base current (IB) is limited to 5mA.
In most cases, the BC547 transistor is used as a switch and it is operated in the saturation and cut-off region. When the transistor acts as an open switch during forwarding Bias and in Reverse Bias, it acts as a Closed switch. Here the maximum biasing current does not exceed 5mA in that case the transistor will damage.
The value of this resistor (RB) can be calculated using the below formulae.
RB = VBE / IB
Where the value of VBE should be 5V for BC547
Base current (IB depends on the Collector current (IC).
The value of IB should not exceed mA.
Transistor Symbol
BC547 Pinout
If the above link is not working check the below link for BC547 Datasheet Pdf Download
https://www.sparkfun.com/datasheets/Components/BC546.pdf
Applications of BC547
- For current Amplification
- Used for Audio Amplifiers
- Switching Loads are less than 100mA
- For switching purpose
- Pulse Width Modulation
- Transistor Darlington Pairs
- The transition frequency of BC547 is 300MHz.
- RF circuits
Frequently asked questions?
BC547 Minimum base Voltage?
The minimum input voltage should be a minimum of 3.3V to turn on the transistor.
BC547 transistor uses
BC547 is a semiconductor device for amplifying, controlling, and generating electrical signals. Transistors are the active components of integrated circuits, or “microchips